Skip to main content

DDR6 Memory Officially Unveiled! Starting at 12800MT/s

Recently, JEDEC, the organization responsible for setting memory standards, officially announced the preliminary plans for the next-generation DDR6 DRAM standard. This not only brings higher transfer rates and greater capacity but also proposes a design that reduces the length of memory modules by approximately 44%.

According to the preview information released by JEDEC, the target transfer rate for DDR6 RDIMM will surpass DDR5's 9.2GT/s, starting at 12.8GT/s (12800MT/s), with future roadmaps aiming to increase it to 14.4GT/s (14400MT/s) and even higher levels.

DDR6内存正式揭晓!起步就是12800MT/s

DDR6 will also widen the data bus from 64-bit to 96-bit, a 50% increase in width, while introducing a pseudo-channel architecture, doubling the number of internal banks, and improving refresh mechanisms.

JEDEC expects that, thanks to the combined increase in transfer rates and bus width, the new standard will deliver an increase in memory bandwidth of over 50% at its initial launch.

The form factor of the new generation of memory has also undergone significant changes. JEDEC proposes a compact DDR6 module length of 74mm, compared to approximately 133mm for traditional DDR5 DIMMs, representing a reduction of about 44%.

Shorter modules help arrange higher-density memory configurations within limited motherboard space, which is particularly suitable for servers and data centers with high capacity requirements.

DDR6内存正式揭晓!起步就是12800MT/s

In terms of capacity, DDR6 is planned to support single DRAM chip densities of up to 128Gb, equivalent to 16GB, and will further increase unit package capacity through optimized chip stacking. Its design will also accommodate various system-level ECC schemes to enhance reliability.

JEDEC also plans to improve DDR6's performance per watt by utilizing VSS-terminated I/O design and low-power modes oriented toward data centers, in order to meet the growing demands for memory bandwidth and capacity from AI inference, agent AI, cloud computing, and other applications.

Currently, DDR6 has not definitively switched entirely to any one module form factor; JEDEC is still researching different forms such as RDIMM, UDIMM, and CAMM.

Currently, DDR6 is still in the standardization phase. JEDEC has clearly stated that the disclosed specifications are part of the R&D plan and the final content may be subject to adjustment.